Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 226
show ip dvmrp next-hop
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
www.dell.com | support.dell.com The following table describes the fields shown in the display: Field Interface Neighbor Up Time Expiry Time Version Capabilities State Description Interface type, number. The DVMRP neighbor IP address. The time since this DVMRP neighbor became a neighbor of the local router. The minimum time remaining before this DVMRP neighbor is aged out. The neighboring router DVMRP version number. Describes the neighboring router capabilities. L-Indicates the neighbor has only one interface with neighbors. P-Indicates the neighbor supports pruning. G-Indicates the neighbor sends its generation ID in Probe messages. M-Indicates the neighbor can handle mtrace requests. State of the neighbor adjacency. Can be One way, Active, ignoring or down. show ip dvmrp next-hop The show ip dvmrp next-hop user EXEC command displays DVMRP-next-hop information on a per-interface basis. Syntax show ip dvmrp next-hop [ethernet interface-number | vlan vlan-id | port-channel number] • ethernet interface-number-Ethernet port number. • vlan vlan-id-VLAN number. • port-channel number-Port-channel number. Default Configuration This command has no default configuration. Command Mode User EXEC mode User Guidelines There are no user guidelines for this command. 226 Multicast Routing Commands