Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 29

bridge multicast forbidden Enables forbidding forwarding of all Multicast packets to a port. VC forward-all bridge aging-time Sets the address table aging time. GC clear bridge Removes any learned entries from the forwarding database. PE port security Disables new address learning on an interface. IC port security routed secure- Adds MAC-layer secure addresses to a routed port. IC address show bridge address-table Displays dynamically created entries in the bridge-forwarding PE database. show bridge address-table static Displays statically created entries in the bridge-forwarding database. PE show bridge multicast address- Displays Multicast MAC address table information. PE table show bridge multicast filtering Displays the Multicast filtering configuration. PE show ports security Displays the port-lock status. PE Clock Commands Command Group clock source clock timezone clock summer-time sntp authentication-key sntp authenticate sntp trusted-key sntp client poll timer sntp broadcast client enable sntp anycast client enable sntp client enable sntp unicast client enable sntp unicast client poll sntp server show clock Description Configures an external time source to maintain the system clock Defines the time zone for display purposes Configures the system clock to automatically switch to Daylight Savings Time Defines an authentication key for SNTP Set to require authentication for received NTP traffic from servers Defines the authentication key used to authenticate the SNTP server Defines polling time for the SNTP client. Enables SNTP Broadcast clients Enables SNTP Anycast clients Enables SNTP Broadcast and Anycast clients on an interface Enables predefined SNTP Broadcast Unicast clients Enables polling predefined SNTP Broadcast Unicast clients Configures the device to use SNTP to request and accept NTP traffic from a server Displays the time and date of the system clock Mode GC GC GC GC GC GC GC GC GC IC GC GC GC UE Command Groups 29