Dell PowerConnect 6024 Command Line Interface (CLI) Guide (.htm) - Page 89
bridge multicast forbidden address, interface vlan, ethernet
View all Dell PowerConnect 6024 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
bridge multicast address {mac-multicast-address | ip-multicast-address} [add | remove] {ethernet interface-list | port-channel port-channel-number-list} no bridge multicast address {mac-multicast-address | ip-multicast-address} • add-Adds ports to the group. If no option is specified, this is the default option. • remove-Removes ports from the group. • mac-multicast-address-MAC multicast address. • ip- multicast-address-IP multicast address. • interface-list-Separate nonconsecutive Ethernet ports with a comma and no spaces; a hyphen is used to designate a range of ports. • port-channel-number-list-Separate nonconsecutive port-channels with a comma and no spaces; a hyphen is used to designate a range of ports. Default Configuration No Multicast addresses are defined. Command Mode Interface configuration (VLAN) mode User Guidelines If the command is executed without add or remove, the command only registers the group in the bridge database. Static Multicast addresses can only be defined on static VLANs. Examples The following example registers the MAC address:. Console (config)# interface vlan 8 Console (config-if)# bridge multicast address 0100.5e02.0203 The following example registers the MAC address and adds ports statically. Console (config)# interface vlan 8 Console (config-if)# bridge multicast address 0100.5e02.0203 add ethernet g1-9, g2 bridge multicast forbidden address The bridge multicast forbidden address interface configuration command forbids adding a specific Multicast address to specific ports. Address Table Commands 89