HP rp3440 User Service Guide, Sixth Edition - HP 9000 rp3410/rp3440 - Page 127
Inserting the Server Into the Rack, Removing and Replacing the Top Cover on a Rack-Mounted Server
View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Figure 6-3 Release the Rack Latches 3. Slide the server out of the rack until the guide-rail release clips are visible. Inserting the Server Into the Rack To insert the server into the rack, follow these steps: 1. Press the rail clips on either side of the server inward and push the server into the rack until it stops. 2. Verify that the rack latches are closed. Removing and Replacing the Top Cover on a Rack-Mounted Server Removing the Top Cover on a Rack-Mounted Server NOTE: If you are replacing a hot-swappable item, you can leave the server on and external cables (including the power cord) connected. To remove the top cover, follow these steps: 1. Power off the server and disconnect the power and external cables from the back of the server. 2. Ensure the top cover lock keyswitch is in the unlocked position. Rotate the blue release lever toward the back of the server and slide the cover toward the back of the server. Removing and Replacing Server Covers and Bezel 127