HP rp3440 User Service Guide, Sixth Edition - HP 9000 rp3410/rp3440 - Page 192

Removing and Replacing System Fans Replacing the PCI Card Cage

Get HP rp3440 PDF manuals and user guides View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 192 highlights

1. Insert the hard drive backplane onto its four chassis standoffs and slide it to the left as you face it. This locks the hard drive backplane in place. 2. Screw in the two backplane mounting screws and connect the two SCSI cables. 3. Connect the backplane power cable and lower the fan power bridge until it snaps in place. 4. Replace fans 2 and 3. (See "Removing and Replacing System Fans" (page 136).) 5. Replace the PCI card cage. (See "Replacing the PCI Card Cage" (page 168).) 6. Replace the top cover. 7. Reconnect all the power and external cables. 8. Verify the backplane replacement and operation by using the system utilities. (For additional information, see Appendix B (page 199) or the HP Integrity and HP 9000 iLO MP Operations Guide.) • Use the iLO MP commands to verify operation. • Use the BCH commands to verify operation. 192 Removing and Replacing Components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
1.
Insert the hard drive backplane onto its four chassis standoffs and slide it to the left as you
face it. This locks the hard drive backplane in place.
2.
Screw in the two backplane mounting screws and connect the two SCSI cables.
3.
Connect the backplane power cable and lower the fan power bridge until it snaps in place.
4.
Replace fans 2 and 3. (See
“Removing and Replacing System Fans” (page 136)
.)
5.
Replace the PCI card cage. (See
“Replacing the PCI Card Cage” (page 168)
.)
6.
Replace the top cover.
7.
Reconnect all the power and external cables.
8.
Verify the backplane replacement and operation by using the system utilities. (For additional
information, see
Appendix B (page 199)
or the
HP Integrity and HP 9000 iLO MP Operations
Guide
.)
•
Use the iLO MP commands to verify operation.
•
Use the BCH commands to verify operation.
192
Removing and Replacing Components