HP rp3440 User Service Guide, Sixth Edition - HP 9000 rp3410/rp3440 - Page 202
Information Menu, command displays the system model string.
View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
BOot [PRI|ALT|] DIsplay HElp [] RESET MAin ---Configuration Menu: Enter command > Boot from specified path Redisplay the current menu Display help for specified command Restart the system Return to Main Menu The configuration default command sets the following values: Primary boot path: 0/0/1/0.0 Alternate boot path: 0/0/2/0 Console path: 0/0/1/0.0 Keyboard path: 0/0/4/0.0 Autoboot: ON Autosearch: ON Autostart: OFF BootTimer 0 Information Menu The Information menu commands enable you to view information about the configuration and state of the system. Main Menu: Enter command or menu > in ---- Information Menu Command ------ALL BootINfo CAche ChipRevisions COprocessor FwrVersion * IO LanAddress MEmory ** PRocessor *** WArnings *** IORevisions Description ----------Display all system information Display boot-related information Display cache information Display revisions of major VLSI Display coprocessor information Display firmware version Display I/O interface information Display Core LAN station address Display memory information Display processor information Display selftest warning messages Display selftest warning messages BOot [PRI|ALT|] DIsplay HElp [] RESET MAin ---Information Menu: Enter command > Boot from specified path Redisplay the current menu Display help for specified command Restart the system Return to Main Menu * The PCI device information displayed includes description, path, vendor ID, device ID, slot number, and bus number. ** The PRocessor command displays the system model string. ***Warnings displayed are as follows: • WARNING: Too many CPUS for a rp3410 system. System will not boot. • WARNING: A fatal error has occurred-system cannot boot. Review warning messages in the information menu. 202 Utilities