HP rp3440 User Service Guide, Sixth Edition - HP 9000 rp3410/rp3440 - Page 178

Removing System Memory Removing a Dual Processor Module

Get HP rp3440 PDF manuals and user guides View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 178 highlights

• Memory (DIMMs). (See "Removing System Memory" (page 152)) • Dual processor modules. (See "Removing a Dual Processor Module" (page 155)) • iLO MP card. (See "Removing the iLO MP Card" (page 173)) 4. Remove the mechanical covers that are covering the VGA and DB9 ports. Figure 6-64 Removing the Mechanical Covers 5. Unscrew the six backplane system board mounting screws that connect the system board to the rear of the server chassis. Figure 6-65 Removing the Backplane System Board Mounting Screws 6. Disconnect the AC power cable connectors. 7. Disconnect all cables that are connected to the system board. To help with re-assembly, make note of which cables were connected to which connector. 8. Lift the fan bridge to access the three power cables near the PCI card cage. 9. Unscrew the system board mounting screw. A screw symbol is adjacent to the mounting screw. 178 Removing and Replacing Components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
•
Memory (DIMMs). (See
“Removing System Memory” (page 152)
)
•
Dual processor modules. (See
“Removing a Dual Processor Module” (page 155)
)
•
iLO MP card. (See
“Removing the iLO MP Card” (page 173)
)
4.
Remove the mechanical covers that are covering the VGA and DB9 ports.
Figure 6-64 Removing the Mechanical Covers
5.
Unscrew the six backplane system board mounting screws that connect the system board
to the rear of the server chassis.
Figure 6-65 Removing the Backplane System Board Mounting Screws
6.
Disconnect the AC power cable connectors.
7.
Disconnect all cables that are connected to the system board. To help with re-assembly, make
note of which cables were connected to which connector.
8.
Lift the fan bridge to access the three power cables near the PCI card cage.
9.
Unscrew the system board mounting screw. A screw symbol is adjacent to the mounting
screw.
178
Removing and Replacing Components