HP rp3440 User Service Guide, Sixth Edition - HP 9000 rp3410/rp3440 - Page 175
Removing and Replacing the iLO MP Card Battery, Battery Notice, Removing the iLO MP Card Battery
View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
7. Verify the card replacement and operation by using the system utilities. (For additional information, see Appendix B (page 199) or the HP Integrity and HP 9000 iLO MP Operations Guide.) • Use the iLO MP commands to verify operation. • Use the BCH commands to verify operation. 8. Turn on the server. Removing and Replacing the iLO MP Card Battery Systems have a second battery that might need replacement. The iLO MP card battery is located on the underside of the iLO MP card. Battery Notice This product contains a Lithium battery (HP part number 1420-0356). WARNING! Lithium batteries can explode if mistreated. Do not recharge, disassemble, or dispose of lithium batteries in a fire. Failure to observe this warning can result in personal injury or damage to equipment. Replace only with the identical or equivalent battery. Follow the manufacturer's recommendations. Dispose of used batteries according to the manufacturer's instructions. Removing the iLO MP Card Battery To remove the iLO MP card battery, follow these steps: 1. Remove the iLO MP card. (See "Removing the iLO MP Card" (page 173).) 2. Locate the iLO MP card battery on the bottom of the card. (See Figure 6-62.) Removing and Replacing the iLO MP Card Battery 175