HP rp3440 User Service Guide, Sixth Edition - HP 9000 rp3410/rp3440 - Page 69

Replacing the Processor Airflow Guide, Replacing the Memory Airflow Guide

Get HP rp3440 PDF manuals and user guides View all HP rp3440 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Replacing the Processor Airflow Guide To replace the processor airflow guide, follow these steps: 1. Replace the front portion of the airflow guide: a. Align the release latch of the front half of the airflow guide over the release latch post and snap it in place. b. Connect the power connector on the front portion of the guide to the connector on the system board. 2. Insert system fans 1A and 1B into their mounting positions. 3. Route the processor turbo fan power cables through the processor heatsink posts so that the cables will not be pinched between the heatsink posts and the processor airflow guide (Figure 3-29). CAUTION: Turbo fan power cables can be damaged if pinched between the heatsink posts and the processor airflow guide. Ensure that the cables are below the top surface of the heatsink posts before installing the processor airflow guide. Figure 3-29 Routing the Turbofan Power Cables Through Heatsink Posts 4. Replace the main portion of the airflow guide: a. Hold the opening on top of the processor airflow guide. b. At the same time, grasp the back end of the airflow guide and insert the airflow guide into the server. c. Connect the power module cable. d. Place the power and IDE cables in the cable clips. e. Insert the two airflow guide retaining tabs into the two slots on the front half of the airflow guide. f. Replace the memory airflow guide. "Replacing the Memory Airflow Guide" (page 66) 5. Replace the server cover. Installing Additional Components 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
Replacing the Processor Airflow Guide
To replace the processor airflow guide, follow these steps:
1.
Replace the front portion of the airflow guide:
a.
Align the release latch of the front half of the airflow guide over the release latch post
and snap it in place.
b.
Connect the power connector on the front portion of the guide to the connector on the
system board.
2.
Insert system fans 1A and 1B into their mounting positions.
3.
Route the processor turbo fan power cables through the processor heatsink posts so that the
cables will not be pinched between the heatsink posts and the processor airflow guide
(
Figure 3-29
).
CAUTION:
Turbo fan power cables can be damaged if pinched between the heatsink posts
and the processor airflow guide. Ensure that the cables are below the top surface of the
heatsink posts before installing the processor airflow guide.
Figure 3-29 Routing the Turbofan Power Cables Through Heatsink Posts
4.
Replace the main portion of the airflow guide:
a.
Hold the opening on top of the processor airflow guide.
b.
At the same time, grasp the back end of the airflow guide and insert the airflow guide
into the server.
c.
Connect the power module cable.
d.
Place the power and IDE cables in the cable clips.
e.
Insert the two airflow guide retaining tabs into the two slots on the front half of the
airflow guide.
f.
Replace the memory airflow guide.
“Replacing the Memory Airflow Guide” (page 66)
5.
Replace the server cover.
Installing Additional Components
69