HP rp3440 User Service Guide, Sixth Edition - HP 9000 rp3410/rp3440 - Page 33

Additional Controls and Indicators HP 9000 rp3410 and rp3440 servers can have up to three low-voltage differential (LVD), 3.5-inch form factor hot-pluggable disk drives installed. These disk drives have LEDs that provide status and activity information. Hot-Pluggable Disk Drive Indicators The disk drives have two LEDs per drive, as follows: Status LED Not used on the HP 9000 rp3410 or rp3440 server. Activity LED Flashing green and indicates disk drive activity. This LED is directly controlled by the disk drive and turns on when a drive is accessed. Figure 1-9 shows the hot-pluggable disk drive LED indicators. Figure 1-9 Hot-Pluggable Disk Drive LED Indicators Table 1-8 lists the hot-pluggable disk drive LED definitions. Table 1-8 Hot-Pluggable Disk Drive LED Definitions LED Status LED Activity LED State None Flashing green Description Not used Reading and scanning hard drive Optional Removable Media Drive HP 9000 rp3410 and rp3440 servers are delivered without a removable media drive. You can add either a DVD or CD-RW/DVD drive. Each of these optional devices has one activity LED. Figure 1-10 shows the DVD drive details. Figure 1-10 DVD Drive Table 1-9 lists the DVD drive LED definitions. Table 1-9 DVD Drive LED Definitions LED Activity LED State Flashing green Description Drive is active Controls, Ports, and LEDs 33