Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 117
storm-control multicast Global
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
ProSafe Managed Switch Format Mode storm-control multicast rate Interface Config no storm-control multicast rate This command sets the multicast storm recovery threshold to the default value for an interface and disables multicast storm recovery. Format Mode no storm-control multicast rate Interface Config storm-control multicast (Global) This command enables multicast storm recovery mode for all interfaces. If the mode is enabled, multicast storm recovery is active, and if the rate of L2 multicast traffic ingressing on an interface increases beyond the configured threshold, the traffic will be dropped. Therefore, the rate of multicast traffic will be limited to the configured threshold. Default Format Mode disabled storm-control multicast Global Config no storm-control multicast This command disables multicast storm recovery mode for all interfaces. Format Mode no storm-control multicast Global Config storm-control multicast level (Global) This command configures the multicast storm recovery threshold for all interfaces as a percentage of link speed and enables multicast storm recovery mode. If the mode is enabled, multicast storm recovery is active, and if the rate of L2 multicast traffic ingressing on an interface increases beyond the configured threshold, the traffic will be dropped. Therefore, the rate of multicast traffic will be limited to the configured threshold. Default Format Mode 5 storm-control multicast level Global Config Switching Commands 117