Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 663
show users, show users accounts, no username snmpv3 encryption
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 663 highlights
ProSafe Managed Switch no username snmpv3 encryption Use this command to set the encryption protocol to none. The is the login user name for which the specified encryption protocol will be used. Format Mode no username snmpv3 encryption Global Config show users Use this command to display the configured user names and their settings. This command is only available for users with Read/Write privileges. The SNMPv3 fields will only be displayed if SNMP is available on the system. Format Mode show users Privileged EXEC Term User Name Access Mode SNMPv3 Access Mode SNMPv3 Authentication SNMPv3 Encryption Definition The name the user enters to login using the serial port, Telnet or Web. Shows whether the user is able to change parameters on the switch (Read/Write) or is only able to view them (Read Only). As a factory default, the "admin" user has Read/Write access and the "guest" has Read Only access. There can only be one Read/Write user and up to five Read Only users. The SNMPv3 Access Mode. If the value is set to ReadWrite, the SNMPv3 user is able to set and retrieve parameters on the system. If the value is set to ReadOnly, the SNMPv3 user is only able to retrieve parameter information. The SNMPv3 access mode may be different than the CLI and Web access mode. The authentication protocol to be used for the specified login user. The encryption protocol to be used for the specified login user. show users accounts Use this command to display the local user status with respect to user account lockout and password aging. Format Mode show users accounts Privileged EXEC Term Definition User Name The local user account's user name. Privilege The user's privilege level (1-15). Password aging The password aging time for the local users. Management Commands 663