Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 27

ProSafe Managed Switch show supported cardtype This commands displays information about all card types or specific card types supported in the system. Format Mode show supported cardtype [] User EXEC If you do not supply a value for , the following output appears: Term Definition Card Index (CID) The index into the database of the supported card types. This index is used when preconfiguring a slot. Card Model Identifier The model identifier for the supported card type. If you supply a value for , the following output appears: Term Definition Card Type The 32-bit numeric card type for the supported card. Model Identifier The model identifier for the supported card type. Card Description The description for the supported card type. show switch This command displays information about all units in the stack or a single unit when you specify the unit value. For units that would normally be allowed to join the stack but do not have a matching stack template ID, their switch status is shown as "STM Mismatch." Format Mode show switch [] Privileged EXEC Term Switch Definition The unit identifier assigned to the switch. When you do not specify a value for , the following information appears: Term Management Status Preconfigured Model Identifier Definition Indicates whether the switch is the Primary Management Unit, a stack member, or the status is unassigned. The model identifier of a preconfigured switch ready to join the stack. The Model Identifier is a 32-character field assigned by the device manufacturer to identify the device. Stacking Commands 27