Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 465
no cos-queue random-detect, random-detect exponential weighting-constant, random-detect queue-parms
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 465 highlights
ProSafe Managed Switch no cos-queue random-detect Use this command to disable WRED and restore the default tail drop operation for the specified queues on all interfaces or one interface. Format Modes cos-queue random-detect queue-id-1 [queue-id-2 ... queue-id-n] • Global Config • Interface Config random-detect exponential weighting-constant Use this command to configure the WRED decay exponent for a CoS queue interface. Format Modes Default random-detect exponential-weighting-constant 0-15 • Global Config • Interface Config 9 no random-detect exponential weighting-constant Use this command to reset the WRED decay exponent to the default value on all interfaces or one interface. Format Modes no random-detect exponential-weighting-constant 0-15 • Global Config • Interface Config random-detect queue-parms Use this command to configure WRED parameters for each drop precedence level supported by a queue. Use it only when per-COS queue configuration is enabled (using the cos-queue random-detect command). min-thresh is the minimum threshold the queue depth (as a percentage) where WRED starts marking and dropping traffic. max-thresh is the maximum threshold is the queue depth (as a percentage) above which WRED marks / drops all traffic. drop-probability is the percentage probability that WRED will mark/drop a packet, when the queue depth is at the maximum threshold. (The drop probability increases linearly from 0 just before the minimum threshold, to this value at the maximum threshold, then goes to 100% for larger queue depths). Each parameter is specified for each possible drop precedence ("color" of TCP traffic). Quality of Service (QoS) Commands 465