Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 321

ProSafe Managed Switch Parameter Description Number of LSAs Received The number of LSAs of each type received since OSPF counters were last cleared. OSPFv2 Queue Statistics For each OSPFv2 message queue, the current count, the high water mark, the number of packets that failed to be enqueued, and the queue limit. The high water marks are not cleared when OSPF counters are cleared. The following shows example CLI display output for the command. (netgear switch) #show ip ospf traffic Time Since Counters Cleared: 4000 seconds OSPFv2 Packet Statistics Hello Database Desc LS Request Recd: 500 10 20 50 Sent: 400 8 16 40 LSAs Retransmitted 0 LS Update Max Receive Rate........20 pps LS Update Max Send Rate...........10 pps Number of LSAs Received T1 (Router 10 T2 (Network 0 T3 (Net Summary 300 T4 (ASBR Summary 15 T5 (External 20 T7 (NSSA External 0 T9 (Link Opaque 0 T10 (Area Opaque 0 T11 (AS Opaque 0 Total 345 OSPFv2 Queue Statistics Current Max Drops Hello 0 10 0 ACK 2 12 0 Data 24 47 0 Event 1 8 0 LS Update 20 16 Limit 500 1680 500 1000 LS ACK 600 480 Total show ip ospf virtual-link This command displays the OSPF Virtual Interface information for a specific area and neighbor. The parameter identifies the area and the parameter identifies the neighbor's Router ID. Format Modes show ip ospf virtual-link • Privileged EXEC • User EXEC Term Area ID Neighbor Router ID Definition The area id of the requested OSPF area. The input neighbor Router ID. Routing Commands 321