Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 552
emergency, alert, critical, error, warning, notice, debug, from 1 to 65535. You can specify
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 552 highlights
ProSafe Managed Switch no logging cli-command This command disables the CLI command Logging feature. Format Mode no logging cli-command Global Config logging console This command enables logging to the console. You can specify the value as either an integer from 0 to 7 or symbolically through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7). Default Format Mode disabled; critical when enabled logging console [severitylevel] Global Config no logging console This command disables logging to the console. Format Mode no logging console Global Config logging host This command enables logging to a host. You can configure up to eight hosts. The is the IP address of the logging host. The indicates the type of address ipv4 or ipv6 or dns being passed. The value is a port number from 1 to 65535. You can specify the value as either an integer from 0 to 7 or symbolically through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7). The end user can configure either an IPv4 or IPv6 address or a host name for a Syslog collector among the list of servers. Default Format Mode • port-514 • level-critical (2) logging host [][] Global Config Utility Commands 552