Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 153
ip verify binding, ip dhcp snooping limit
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
ProSafe Managed Switch ip verify binding Use this command to configure static IP source guard (IPSG) entries. Format Mode ip verify binding vlan interface Global Config no ip verify binding Use this command to remove the IPSG static entry from the IPSG database. Format Mode no ip verify binding vlan interface Global Config ip dhcp snooping limit Use this command to control the rate at which the DHCP Snooping messages come. The default rate is 15 pps with a range from 0 to 30 pps. The default burst level is 1 second with a range of 1 to 15 seconds. Default Format Mode 15 pps for rate limiting and 1 sec for burst interval ip dhcp snooping limit {rate pps [burst interval seconds]} Interface Config no ip dhcp snooping limit Use this command to set the rate at which the DHCP Snooping messages come, and the burst level, to the defaults. Format Mode no ip dhcp snooping limit Interface Config ip dhcp snooping log-invalid Use this command to control the logging DHCP messages filtration by the DHCP Snooping application. Default Format Mode disabled ip dhcp snooping log-invalid Interface Config Switching Commands 153