Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 412
no exit-overflow-intervalOSPFv3, no external-lsdb-limit, external-lsdb-limit OSPFv3
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 412 highlights
ProSafe Managed Switch exit-overflow-interval (OSPFv3) This command configures the exit overflow interval for OSPF. It describes the number of seconds after entering Overflow state that a router will wait before attempting to leave the overflow state. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave overflow state until restarted. The range for is 0 to 2147483647 seconds. Default Format Mode 0 exit-overflow-interval Router OSPFv3 Config no exit-overflow-interval(OSPFv3) This command configures the default exit overflow interval for OSPF. Format Mode no exit-overflow-interval Router OSPFv3 Config external-lsdb-limit (OSPFv3) This command configures the external LSDB limit for OSPF. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches the external LSDB limit, the router enters overflow state. The router never holds more than the external LSDB limit non-default AS-external-LSAs in it database. The external LSDB limit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. The range for is -1 to 2147483647. Default Format Mode -1 external-lsdb-limit Router OSPFv3 Config no external-lsdb-limit This command configures the default external LSDB limit for OSPF. Format Mode no external-lsdb-limit Router OSPFv3 Config IPv6 Commands 412