Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 344

ProSafe Managed Switch show ip mcast mroute source This command displays the multicast configuration settings such as flags, timer settings, incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all the entries in the multicast mroute table containing the given source IP address or source IP address and group IP address pair. Format Modes show ip mcast mroute source {summary | detail} • Privileged EXEC • User EXEC If you use the detail parameter, the command displays the following column headings in the output table: Term Source IP Group IP Expiry Time Up Time RPF Neighbor Flags Definition The IP address of the multicast data source. The IP address of the destination of the multicast packet. The time of expiry of this entry in seconds. The time elapsed since the entry was created in seconds. The IP address of the RPF neighbor. The flags associated with this entry. If you use the summary parameter, the command displays the following column headings in the output table: Term Source IP Group IP Protocol Incoming Interface Outgoing Interface List Definition The IP address of the multicast data source. The IP address of the destination of the multicast packet. The multicast routing protocol by which this entry was created. The interface on which the packet for this source arrives. The list of outgoing interfaces on which this packet is forwarded. DVMRP Commands This section provides a detailed explanation of the Distance Vector Multicast Routing Protocol (DVMRP) commands. IP Multicast Commands 344