Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 707
debug tacacs packet, tacacs-server host
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 707 highlights
ProSafe Managed Switch delivery and a shared key configured on the client and daemon server to encrypt all messages. debug tacacs packet Use the debug tacacs packet command to turn on TACACS+ packet debug. Default Format Mode Disabled debug tacacs packet [receive | transmit] Global Config no debug tacacs packet Use this command to turn off TACACS+ packet debug. Format Mode no debug tacacs packet Global Config tacacs-server host Use the tacacs-server host command in Global Configuration mode to configure a TACACS+ server. This command enters into the TACACS+ configuration mode. The parameter is the IP address or hostname of the TACACS+ server. To specify multiple hosts, multiple tacacs-server host commands can be used. Format Mode tacacs-server host Global Config no tacacs-server host Use the no tacacs-server host command to delete the specified hostname or IP address. The parameter is the IP address of the TACACS+ server. Format Mode no tacacs-server host Global Config tacacs-server key Use the tacacs-server key command to set the authentication and encryption key for all TACACS+ communications between the switch and the TACACS+ daemon. The parameter has a range of 0 - 128 characters and specifies the authentication and encryption key for all TACACS communications between the switch and the TACACS+ server. This key must match the key used on the TACACS+ daemon. Text-based configuration supports TACACS server's secrets in encrypted and non-encrypted format. When you save the configuration, these secret keys are stored in encrypted format Management Commands 707