Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 142

ProSafe Managed Switch • For multicast MAC address filters with destination ports configured, the maximum number of static filters supported is 256. For example, for current platforms you can configure the following combinations: • Unicast MAC and source port (max = 20) • Multicast MAC and source port (max=20) • Multicast MAC and destination port (only) (max=256) • Multicast MAC and source ports and destination ports (max=20) Format Mode macfilter Global Config no macfilter This command removes all filtering restrictions and the static MAC filter entry for the MAC address on the VLAN . The parameter must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The parameter must identify a valid VLAN. Format Mode no macfilter Global Config macfilter adddest Use this command to add the interface to the destination filter set for the MAC filter with the given and VLAN of . The parameter must be specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The parameter must identify a valid VLAN. Note: Configuring a destination port list is only valid for multicast MAC addresses. Format Mode macfilter adddest Interface Config no macfilter adddest This command removes a port from the destination filter set for the MAC filter with the given and VLAN of . The parameter must be specified as a Switching Commands 142