Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 247

ProSafe Managed Switch You can view the current value for this function with the show ip brief command. The value is labeled as "Routing Mode." Format Mode no routing Interface Config ip routing This command enables the IP Router Admin Mode for the master switch. Format Mode ip routing Global Config no ip routing This command disables the IP Router Admin Mode for the master switch. Format Mode no ip routing Global Config ip address This command configures an IP address on an interface. You can also use this command to configure one or more secondary IP addresses on the interface.The value for is the IP address of the interface. The value for is a 4-digit dotted-decimal number which represents the subnet mask of the interface. The subnet mask must have contiguous ones and be no longer than 30 bits, for example 255.255.255.0. This command adds the label IP address in show ip interface. Format Mode ip address [secondary] Interface Config Parameter ipaddr subnetmask masklen Description The IP address of the interface. A four-digit dotted-decimal number that represents the subnet mask of the interface Implements RFC 3021. Using the / notation of the subnet mask, this is an integer that indicates the length of the subnet mask. Range is 5 to 32 bits. no ip address This command deletes an IP address from an interface. The value for is the IP address of the interface in a.b.c.d format where the range for a, b, c, and d is 1-255. The value for is a 4-digit dotted-decimal number which represents the Subnet Routing Commands 247