Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 235

ProSafe Managed Switch received from other interested hosts that are also connected to that port, for example, using hub. • In immediate leave mode, when a leave is received, the switch is immediately reconfigured not to forward a specific multicast stream to the port where a message is received. This mode is used only for ports where only one client might be connected. Format Mode Default mvr immediate Interface Config Disabled no mvr immediate This command sets the MVR multicast VLAN to the default value. Format Mode no mvr immediate Interface Config mvr type This command sets the MVR port type. When a port is set as source, it is the port to which the multicast traffic flows using the multicast VLAN. When a port is set to receiver, it is the port where a listening host is connected to the switch. Format Mode Default mvr type { receiver|source } Interface Config none no mvr type Use this command to set the MVR port type to none. Format Mode no mvr type Interface Config mvr vlan group Use this command to include the port in the specific MVR group. is the multicast VLAN, and is the IP multicast group Format Mode mvr vlan group Interface Config Multicast VLAN Registration (MVR) 235