Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 766

ProSafe Managed Switch Term Interface Interface Description Type Definition The interface associated with the CP ID. The description of the interface The type of the interface Example (switch)#show captive-portal interface configuration status CP ID CP Name Interface Interface Description 1 Default 1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit Type -------- Physical (switch)#show captive-portal interface configuration 1 status CP ID 1 CP Name cp1 Interface Interface Description Type --------- 1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit Physical Captive Portal Local User Commands The following section describes captive portal local user commands. user password Use this command to create a local user or change the password for an existing user. The user-id is user ID in the range of 1-128. The password is the user password in the range of 8-64 characters. You can also enter encrypted password using the parameter encrypted. Format Mode user user-id password { password | encrypted enc-password } Captive Portal Configuration mode no user Use this command to delete a user from the local user database. If the user has an existing session, it is disconnected. Format Mode no user user-id Captive Portal Configuration mode Captive Portal Commands 766