Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 390

ProSafe Managed Switch Example: The following shows example CLI display output for the command. (Switch) #show ipv6 route IPv6 Routing Table - 3 entries Codes: C - connected, S - static O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF Ext 1, OE2 - OSPF Ext 2 ON1 - OSPF NSSA Ext Type 1, ON2 - OSPF NSSA Ext Type 2 S 2001::/64 [10/0] directly connected, Null0 C 2003::/64 [0/0] via ::, 0/11 S 2005::/64 [1/0] via 2003::2, 0/11 C 5001::/64 [0/0] via ::, 0/5 OE1 6001::/64 [110/1] via fe80::200:42ff:fe7d:2f19, 00h:00m:23s, 0/5 OI 7000::/64 [110/6] via fe80::200:4fff:fe35:c8bb, 00h:01m:47s, 0/11 show ipv6 route ecmp-groups This command reports all current ECMP groups in the IPv6 routing table. An ECMP group is a set of next hops used in one or more routes. The groups are numbered arbitrarily from 1 to n. The output indicates the number of next hops in the group and the number of routes that use the set of next hops. The output lists the IPv6 address and outgoing interface of each next hop in each group. Format Mode show ipv6 route ecmp-groups Privileged EXEC Example (switch) #show ipv6 route ecmp-groups ECMP Group 1 with 2 next hops (used by 1 route) 2001:DB8:1::1 on interface 2/1 2001:DB8:2::14 on interface 2/2 ECMP Group 2 with 3 next hops (used by 1 route) 2001:DB8:4::15 on interface 2/32 2001:DB8:7::12 on interface 2/33 2001:DB8:9::45 on interface 2/34 IPv6 Commands 390