Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 549

ProSafe Managed Switch • show port all • show isdp neighbors • show logging • show event log • show logging buffered • show trap log Format Mode show tech-support Privileged EXEC show tech-support techsupport This command without the techsupport parameter displays system and configuration information on the console. To generate the information in a file, specify the techsupport parameter. Format Mode show tech-support techsupport Privileged EXEC length Use this command to set the pagination length to value number of lines for the sessions specified by configuring on different Line Config modes (telnet, ssh, and console) and is persistent. Default Format Mode 24 length Line Config no length value Use this command to set the pagination length to the default value number of lines. Format Mode no length Line Config terminal length Use this command to set the number of lines of output to be displayed on the screen, i.e. pagination, for the show running-config and show running-config all commands. The terminal length size is either zero or a number in the range of 5 to 48. After the user-configured number of lines is displayed in one page, the system prompts the user "--More-- or (q)uit." Press q or Q to quit, or press any key to display the next set Utility Commands 549