Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 647

ProSafe Managed Switch telnetcon timeout Use this command to set the Telnet connection session timeout value, in minutes. A session is active as long as the session has not been idle for the value set. The time is a decimal value from 1 to 160. Note: When you change the timeout value, the new value is applied to all active and inactive sessions immediately. Any sessions that have been idle longer than the new timeout value are disconnected immediately. Default Format Mode 5 telnetcon timeout Privileged EXEC no telnetcon timeout Use this command to set the Telnet connection session timeout value to the default. Note: Changing the timeout value for active sessions does not become effective until the session is reaccessed. Also, any keystroke activates the new timeout duration. Format Mode no telnetcon timeout Privileged EXEC show telnet Use this command to display the current outbound Telnet settings. In other words, these settings apply to Telnet connections initiated from the switch to a remote system. Format Modes show telnet • Privileged EXEC • User EXEC Management Commands 647