Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 501

ProSafe Managed Switch Term Definition Rule Number The number identifier for each rule that is defined for the IP ACL. Action The action associated with each rule. The possible values are Permit or Deny. Match All Indicates whether this access list applies to every packet. Possible values are True or False. Protocol The protocol to filter for this rule. Source IP Address The source IP address for this rule. Source IP Mask The source IP Mask for this rule. Source L4 Port Keyword The source port for this rule. Destination IP The destination IP address for this rule. Address Destination IP Mask The destination IP Mask for this rule. Destination L4 Port Keyword The destination port for this rule. IP DSCP The value specified for IP DSCP. IP Precedence The value specified IP Precedence. IP TOS The value specified for IP TOS. Log Displays when you enable logging for the rule. Assign Queue The queue identifier to which packets matching this rule are assigned. Mirror Interface The unit/slot/port to which packets matching this rule are copied. Redirect Interface The unit/slot/port to which packets matching this rule are forwarded. Time Range Name Displays the name of the time-range if the ACL rule has referenced a time range. Rule Status Status (Active/Inactive) of the ACL rule. show access-lists This command displays IP ACLs, IPv6 ACLs, and MAC access control lists information for a designated interface and direction. Format Mode show access-lists interface [in|out] Privileged EXEC Quality of Service (QoS) Commands 501