Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 610

ProSafe Managed Switch The following parameters are displayed in the trace message: Parameter TX/RX Intf SrcIp DestIp AreaId Type Definition TX refers to a packet transmitted by the device. RX refers to packets received by the device. The interface that the packet came in or went out on. Format used is unit/slot/port (internal interface number). The source IP address in the IP header of the packet. The destination IP address in the IP header of the packet. The area ID in the OSPF header of the packet. Could be one of the following: HELLO - Hello packet DB_DSCR - Database descriptor LS_REQ - LS Request LS_UPD - LS Update LS_ACK - LS Acknowledge The remaining fields in the trace are specific to the type of OSPF Packet. HELLO packet field definitions: Parameter Netmask DesignRouter Backup Definition The netmask in the hello packet. Designated Router IP address. Backup router IP address. DB_DSCR packet field definitions: Field MTU Options Flags Seq Definition MTU Options in the OSPF packet. Could be one or more of the following: • I - Init • M - More • MS - Master/Slave Sequence Number of the DD packet. Utility Commands 610