Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 269

ProSafe Managed Switch ip vrrp ip This command sets the virtual router IP address value for an interface. The value for is the IP address which is to be configured on that interface for VRRP. The parameter is the virtual router ID which has an integer value range from 1 to 255. You can use the optional [secondary] parameter to designate the IP address as a secondary IP address. Default Format Mode none ip vrrp ip [secondary] Interface Config no ip vrrp ip Use this command in Interface Config mode to delete a secondary IP address value from the interface. To delete the primary IP address, you must delete the virtual router on the interface. Format Mode no ip vrrp secondary Interface Config ip vrrp authentication This command sets the authorization details value for the virtual router configured on a specified interface. The parameter {none | simple} specifies the authorization type for virtual router configured on the specified interface. The parameter [key] is optional, it is only required when authorization type is simple text password. The parameter is the virtual router ID which has an integer value ranges from 1 to 255. Default Format Mode no authorization ip vrrp authentication {none | simple } Interface Config no ip vrrp authentication This command sets the default authorization details value for the virtual router configured on a specified interface. Format Mode no ip vrrp authentication Interface Config Routing Commands 269