Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 715
sdm prefer Mixed Stacking, show sdm prefer
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 715 highlights
ProSafe Managed Switch Parameter Description ipv4-routing Supports IPv4 routing only. -data-center enterprise: Support more ECMP next hops in IPv4 routes. -data-center plus-enterprise: Same as data-center except with more IPv4 routes and ARP entries in enterprise mode. -enterprise: Support more IPv4 routes and ARP entries with less ECMP next hops. dual-ipv4-and-ipv6 Supports both IPv4 and IPv6 routing. This option is visible only when the switch supports IPv6 and IPv4 routing. -data-center-enterprise: Support both IPv4 and IPv6 with more ECMP next hops. -enterprise: Support both IPv4 and IPv6 routing. no sdm prefer Use this command to return to the default template. Format Mode no sdm prefer Global Config sdm prefer (Mixed Stacking) Use this command to specify the SDM template to stack with the following switches. GSM7328S V2H1,GSM7352S V2H1,GSM7228PS V1H1,GSM7228PS V1H1. Format Mode sdm prefer {ipv4-routing smb | dual-ipv4-and-ipv6 { smb | data-center-smb} Global Config Parameter Description ipv4-routing Supports IPv4 routing only. -smb: Reduces all IPv4 table sizes for compatibility with the legacy switches. dual-ipv4-and-ipv6 Supports both IPv4 and IPv6 routing. This option is visible only when the switch supports IPv6 and IPv4 routing. -smb: Reduces all IPv4 and IPv6 table sizes for compatibility with the legacy switches. show sdm prefer Use this command to view the currently active SDM template and its scaling parameters, or to view the scaling parameters for an inactive template. When used with no optional keywords, this command lists the currently active template and the template that will become active on the next reboot, if it is different from the currently active template. If the system boots with a non-default template and you clear the template configuration either using no sdm prefer or by deleting the startup configuration, show sdm prefer lists the default template as the next active template. Management Commands 715