Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 84

ProSafe Managed Switch Default Format Mode unprotected switchport protected Interface Config no switchport protected (Interface Config) Use this command to configure a port as unprotected. The groupid parameter identifies the set of protected ports to which this interface is assigned. Format Mode no switchport protected Interface Config show switchport protected This command displays the status of all the interfaces, including protected and unprotected interfaces. Format Mode show switchport protected • Privileged EXEC • User EXEC Term Definition Group ID The number that identifies the protected port group. Name An optional name of the protected port group. The name can be up to 32 alphanumeric characters long, including blanks. The default is blank. List of Physical Ports List of ports, which are configured as protected for the group identified with . If no port is configured as protected for this group, this field is blank. show interfaces switchport This command displays the status of the interface (protected/unprotected) under the groupid. Format Mode show interfaces switchport • Privileged EXEC • User EXEC Term Name Protected port Definition A string associated with this group as a convenience. It can be up to 32 alphanumeric characters long, including blanks. The default is blank. This field is optional. Indicates whether the interface is protected or not. It shows TRUE or FALSE. If the group is a multiple groups then it shows TRUE in Group . Switching Commands 84