Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 271

ProSafe Managed Switch ip vrrp timers advertise This command sets the frequency, in seconds, that an interface on the specified virtual router sends a virtual router advertisement. Default Format Mode 1 ip vrrp timers advertise Interface Config no ip vrrp timers advertise This command sets the default virtual router advertisement value for an interface. Format Mode no ip vrrp timers advertise Interface Config ip vrrp track interface Use this command to alter the priority of the VRRP router based on the availability of its interfaces. This command is useful for tracking interfaces that are not configured for VRRP. Only IP interfaces are tracked. A tracked interface is up if the IP on that interface is up. Otherwise, the tracked interface is down. When the tracked interface is down or the interface has been removed from the router, the priority of the VRRP router will be decremented by the value specified in the argument. When the interface is up for IP protocol, the priority will be incremented by the value. A VRRP configured interface can track more than one interface. When a tracked interface goes down, then the priority of the router will be decreased by 10 (the default priority decrement) for each downed interface. The default priority decrement is changed using the argument. The default priority of the virtual router is 100, and the default decrement priority is 10. By default, no interfaces are tracked. If you specify just the interface to be tracked, without giving the optional priority, then the default priority will be set. The default priority decrement is 10. Default Format Mode priority: 10 ip vrrp track interface [decrement ] Interface Config Routing Commands 271