Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 221
dos-control icmpfrag, show dos-control
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
ProSafe Managed Switch dos-control icmpfrag This command enables ICMP Fragment Denial of Service protection. If the mode is enabled, Denial of Service prevention is active for this type of attack. If packets ingress having fragmented ICMP packets, the packets will be dropped if the mode is enabled. Default Format Mode disabled dos-control icmpfrag Global Config no dos-control icmpfrag This command disabled ICMP Fragment Denial of Service protection. Format Mode no dos-control icmpfrag Global Config show dos-control This command displays Denial of Service configuration information. Format Mode show dos-control Privileged EXEC Note: Not all messages below are available in all 7000series managed switches. Term Definition First Fragment May be enabled or disabled. The factory default is disabled. Mode Min TCP Hdr Size The factory default is 20. ICMP Mode May be enabled or disabled. The factory default is disabled. Max ICMPv4 Pkt The range is 0-1023. The factory default is 512. Size Max ICMPv6 Pkt The range is 0-16384. The factory default is 512. Size ICMP Fragment Mode May be enabled or disabled. The factory default is disabled. L4 Port Mode May be enabled or disabled. The factory default is disabled. TCP Port Mode May be enabled or disabled. The factory default is disabled. Switching Commands 221