Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 459

ProSafe Managed Switch ------------FF1E::1 FF1E::2 FF1E::3 FF1E::4 FE80::100:2.3 00:01:40 DELAY_MEMBER Exclude 2 FE80::100:2.3 00:02:40 DELAY_MEMBER Include 1 FE80::100:2.3 00:01:40 DELAY_MEMBER Exclude 0 FE80::100:2.3 00:02:44 DELAY_MEMBER Include 4 show ipv6 mld-proxy groups detail Use this command to display information about multicast groups that MLD-Proxy reported. Format Mode show ipv6 mld-proxy groups detail • Privileged EXEC • User EXEC Field Description Interface The interface number of the MLD-Proxy. Group Address The IP address of the multicast group. Last Reporter The IP address of the host that last sent a membership report for the current group, on the network attached to the MLD-Proxy interface (upstream interface). Up Time (in secs) The time elapsed in seconds since last created. Member State Possible values are: • Idle_Member. The interface has responded to the latest group membership query for this group. • Delay_Member. The interface is going to send a group membership report to respond to a group membership query for this group. Filter Mode Possible values are Include or Exclude. Sources The number of sources attached to the multicast group. Group Source List The list of IP addresses of the sources attached to the multicast group. Expiry Time The time left for a source to get deleted. Example: The following shows example CLI display output for the command. (Switch) #show ipv6 igmp-proxy groups Interface Index 1/0/3 Group Address Last Reporter Up Time Member State Filter Mode Sources FF1E::1 FE80::100:2.3 244 DELAY_MEMBER Exclude 2 Group Source List 2001::1 Expiry Time 00:02:40 IPv6 Multicast Commands 459