Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 160
ip arp inspection vlan
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
ProSafe Managed Switch ip arp inspection vlan Use this command to enable Dynamic ARP Inspection on a list of comma-separated VLAN ranges. Default Format Mode disabled ip arp inspection vlan vlan-list Global Config no ip arp inspection vlan Use this command to disable Dynamic ARP Inspection on a list of comma-separated VLAN ranges. Format Mode no ip arp inspection vlan vlan-list Global Config ip arp inspection validate Use this command to enable additional validation checks like source-mac validation, destination-mac validation, and ip address validation on the received ARP packets. Each command overrides the configuration of the previous command. For example, if a command enables src-mac and dst-mac validations, and a second command enables IP validation only, the src-mac and dst-mac validations are disabled as a result of the second command. Default Format Mode disabled ip arp inspection validate {[src-mac] [dst-mac] [ip]} Global Config no ip arp inspection validate Use this command to disable the additional validation checks on the received ARP packets. Format Mode no ip arp inspection validate {[src-mac] [dst-mac] [ip]} Global Config ip arp inspection vlan logging Use this command to enable logging of invalid ARP packets on a list of comma-separated VLAN ranges. Default Format Mode enabled ip arp inspection vlan vlan-list logging Global Config Switching Commands 160