Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 561

ProSafe Managed Switch security Use this command to set the email alerting security protocol by enabling the switch to use TLS authentication with the SMTP Server. If the TLS mode is enabled on the switch but the SMTP sever does not support TLS mode, no email is sent to the SMTP server. Default Format Mode none security {tlsv1 | none} Mail Server Config port Use this command to configure the TCP port to use for communication with the SMTP server. The recommended port for TLSv1 is 465, and for no security (i.e. none) it is 25. However, any nonstandard port in the range 1 to 65535 is also allowed. Default Format Mode 25 port {465 | 25 | 1-65535} Mail Server Config username Use this command to configure the login ID that the switch uses to authenticate with the SMTP server. Default Format Mode admin username name Mail Server Config password Use this command to configure the password that the switch uses to authenticate with the SMTP server. Format Mode password password Mail Server Config show mail-server config Use this command to display information about the email alert configuration. Format Mode show mail-server {ip-address | hostname | all } config Privileged EXEC Utility Commands 561