Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 525
show poe, no poe traps
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 525 highlights
ProSafe Managed Switch no poe traps Use this command to disable logging the PoE traps. Format Mode no poe traps Global Config show poe Use this command to get global information regarding the PoE status. Format Mode show poe Privileged EXEC User EXEC Term Definition Firmware Version This is the firmware version of the PoE controller on the switch. PSE Main This indicates the status of the PoE controller: Operational Status • ON-Indicates that the PoE controller is actively delivering power. • OFF-Indicates that the PoE controller is not delivering power. • FAULTY-Indicates that the PoE controller is not functioning. Total Power (Main This indicates the maximum amount of power that can be delivered by this PoE unit AC) when on system power. Total Power (RPS) This indicates the maximum amount of power that can be delivered by this PoE unit when on RPS. Total Power (PD) This indicates the maximum amount of power that can be delivered by this PoE unit when on the PD source. This field is applicable only for the GSM5212P. Power Source This indicates the power source being used: main AC, RPS, or PD. If PD is used as a source, then "PD " is displayed. Threshold Power System can power up one port, if consumed power is less than this power. That is, the consumed power can be between the total power and threshold power values. The threshold power value is effected by changing the system usage threshold. Total Power Consumed This indicates the total amount of power being delivered to all the devices plugged into the switch. Usage Threshold This indicates the usage threshold level. Power Management Mode This indicates the management mode used by the PoE controller. Auto Reset Mode This indicates whether the PoE ports will be automatically reset in case of an error on a port. Traps This configures the traps. Power over Ethernet (PoE) Commands 525