Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 293

ProSafe Managed Switch clear ip ospf neighbor Use this command to drop the adjacency with all OSPF neighbors. On each neighbor's interface, send a one-way hello. Adjacencies may then be re-established. To drop all adjacencies with a specific router ID, specify the neighbor's Router ID using the optional parameter [neighbor-id]. Format Mode clear ip ospf neighbor [neighbor-id] Privileged EXEC clear ip ospf neighbor interface To drop adjacency with all neighbors on a specific interface, use the optional parameter [unit/slot/port]. To drop adjacency with a specific router ID on a specific interface, use the optional parameter [neighbor-id]. Format Mode clear ip ospf neighbor interface [unit/slot/port] [neighbor-id] Privileged EXEC clear ip ospf redistribution Use this command to flush all self-originated external LSAs. Reapply the redistribution configuration and re-originate prefixes as necessary. Format Mode clear ip ospf redistribution Privileged EXEC clear ip ospf stub-router OSPF can enter stub router mode due to resource exhaustion (too many LSA's, too many routes, memory allocation failures etc). When this happens, the user can get out of this mode by issuing the command after the cause of the overload has been resolved. Format Mode clear ip ospf stub-router Privileged EXEC default-information originate (OSPF) This command is used to control the advertisement of default routes. Default Format Mode • metric-unspecified • type-2 default-information originate [always] [metric ] [metric-type {1 | 2}] Router OSPF Config Routing Commands 293