Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 698
radius server msgauth, radius server primary
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 698 highlights
ProSafe Managed Switch The following shows an example of the CLI command. radius server key acct 10.240.4.10 encrypted radius server msgauth Use this command to enable the message authenticator attribute to be used for the specified RADIUS Authenticating server. Format Mode radius server msgauth Global Config Field ip addr dnsname Description The IP address of the server. The DNS name of the server. no radius server msgauth Use the no version of this command to disable the message authenticator attribute to be used for the specified RADIUS Authenticating server. Format Mode no radius server msgauth Global Config radius server primary Use this command to designate a configured server as the primary server in the group of servers that have the same server name. Multiple primary servers can be configured for each number of servers that have the same name. When the RADIUS client has to perform transactions with an authenticating RADIUS server of specified name, the client uses the primary server that has the specified server name by default. If the RADIUS client fails to communicate with the primary server for any reason, the client uses the backup servers configured with the same server name. These backup servers are identified as the 'Secondary' type. Format Mode radius server primary {} Global Config Field ip addr dnsname Description The IP address of the RADIUS Authenticating server. The DNS name of the server. Management Commands 698