Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 677

ProSafe Managed Switch aaa authorization This command creates an authorization method list. This list is identified by "default" or a user-specified "list_name." If "tacacs" is specified as the Authorization method, Authorization commands are notified to a TACACS+ server. If "none" is specified as the Authorization method, command authorization is not applicable. A maximum of 5 Authorization Method Lists can be created for "commands" type. Note: Local method is not supported for command Authorization. Also note that command authorization with RADIUS works if and only if the applied authentication method is also radius. Format Mode aaa authorization {commands | exec } {default | } method1[method2] Global Config Term commands Exec default list-name method Definition Alphanumeric character string used to name the list of authorization methods. The default list of methods for authorization services. The default list of methods for authorization services. Alphanumeric character string used to name the list of authorization methods. TACACS+/RADIUS/Local and none are supported. no aaa authorization This command deletes the authorization method list. Format Mode no aaa authorization {commands | exec } {default | } method1[method2] Global Config authorization(console/telnet/ssh) To apply the command authorization method list to an access method (console/telnet/ssh). Apply this command in the line configuration mode. Format Mode authorization {commands | exec }[default |] • Line console • Line telnet • Line SSH Management Commands 677