Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 548
show running-config interface, show sysinfo, show tech-support
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 548 highlights
ProSafe Managed Switch If some, but not all, of the flags in that group are enabled, the command displays trapflags . Format Mode show running-config [all | ] Privileged EXEC show running-config interface This command shows the current configuration on a particular interface. The interface could be a physical port or a virtual port-like a LAG or VLAN. The output captures how the configuration differs from the factory default value. Format Mode show running-config interface {} | VLAN | LAG } Interface Config show sysinfo This command displays switch information. Format Mode show sysinfo Privileged EXEC Term Definition Switch Description Text used to identify this switch. System Name Name used to identify the switch. The factory default is blank. To configure the system name, see snmp-server on page 683. System Location Text used to identify the location of the switch. The factory default is blank. To configure the system location, see snmp-server on page 683. System Contact Text used to identify a contact person for this switch. The factory default is blank. To configure the system location, see snmp-server on page 683. System Object ID The base object ID for the switch's enterprise MIB. System Up Time The time in days, hours and minutes since the last switch reboot. MIBs Supported A list of MIBs supported by this agent. show tech-support Use this command to display system and configuration information when you contact technical support. The output of this command combines the output of the following commands: • show version • show sysinfo Utility Commands 548