Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 52
spanning-tree tcnguard, spanning-tree max-age
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
ProSafe Managed Switch spanning-tree tcnguard This command enables the propagation of received topology change notifications and topology changes to other ports. Default Format Mode disable spanning-tree tcnguard Interface Config no spanning-tree tcnguard This command disables the propagation of received topology change notifications and topology changes to other ports. Format Mode no spanning-tree tcnguard Interface Config spanning-tree max-age This command sets the Bridge Max Age parameter to a new value for the common and internal spanning tree. The max-age value is in seconds within a range of 6 to 40, with the value being less than or equal to 2 x (Bridge Forward Delay - 1). Default Format Mode 20 spanning-tree max-age Global Config no spanning-tree max-age This command sets the Bridge Max Age parameter for the common and internal spanning tree to the default value. Format Mode no spanning-tree max-age Global Config spanning-tree max-hops This command sets the MSTP Max Hops parameter to a new value for the common and internal spanning tree. The max-hops value is a range from 6 to 40. Default Format Mode 20 spanning-tree max-hops Global Config Switching Commands 52