Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 562

ProSafe Managed Switch Term Definition No of mail servers configured The number of SMTP servers configured on the switch. Email Alert Mail Server Address The IPv4/IPv6 address or DNS hostname of the configured SMTP server. Email Alert Mail Server Port The TCP port the switch uses to send email to the SMTP server. Email Alert Security Protocol The security protocol (TLS or none) the switch uses to authenticate with the SMTP server. Email Alert Username The username the switch uses to authenticate with the SMTP server. Email Alert Password The password the switch uses to authenticate with the SMTP server. System Utility and Clear Commands This section describes the commands you use to help troubleshoot connectivity issues and to restore various configurations to their factory defaults. traceroute Use the traceroute command to discover the routes that packets actually take when traveling to their destination through the network on a hop-by-hop basis. Traceroute continues to provide a synchronous response when initiated from the CLI. Default Format Mode • count: 3 probes • interval: 3 seconds • size: 0 bytes • port: 33434 • maxTtl: 30 hops • maxFail: 5 probes • initTtl: 1 hop traceroute [initTtl ] [maxTtl ] [maxFail ] [interval ] [count ] [port ] [size ] [source{ip-address| | loopback }] Privileged EXEC Utility Commands 562