Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 34

ProSafe Managed Switch show checkpoint statistics Use this command to display general information about the checkpoint service operation. Format Mode show checkpoint statistics Privileged EXEC Term Description Messages Checkpointed Number of checkpoint messages transmitted to the backup unit. Range: Integer. Def ault:0 Bytes Checkpointed Number of bytes transmitted to the backup unit. Range: Integer. Default:0 Time Since Number of days, hours, minutes and seconds since the counters were reset to zero. Counters Cleared The counters are cleared when a unit becomes manager and with a support command. Range: Time Stamp. Default: 0d00:00:00 Checkpoint Message Rate Average Number of checkpoint messages per second. The average is computed over the time period since the counters were cleared. Range: Integer. Default:0 Last 10-second Message Rate Average Number of checkpoint messages per second in the last 10-second interval. This average is updated once every 10 seconds. Range: Integer. Default:0 Highest 10-second Message Rate The highest rate recorded over a 10-second interval since the counters were cleared. Range: Integer. Default:0 Example: (Switch)#show checkpoint statistics Messages Checkpointed 6708 Bytes Checkpointed 894305 Time Since Counters Cleared 3d 01:05:09 Checkpoint Message Rate 0.025 msg/sec Last 10-second Message Rate 0 msg/sec Highest 10-second Message Rate............8 msg/sec clear checkpoint statistics This command clears the statistics for the checkpointing process. Format Mode clear checkpoint statistics Privileged EXEC Stacking Commands 34