Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 154
ip dhcp snooping trust, ip verify source, no ip dhcp snooping log-invalid
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
ProSafe Managed Switch no ip dhcp snooping log-invalid Use this command to disable the logging DHCP messages filtration by the DHCP Snooping application. Format Mode no ip dhcp snooping log-invalid Interface Config ip dhcp snooping trust Use this command to configure the port as trusted. Default Format Mode disabled ip dhcp snooping trust Interface Config no ip dhcp snooping trust Use this command to configure the port as untrusted. Format Mode no ip dhcp snooping trust Interface Config ip verify source Use this command to configure the IPSG source ID attribute to filter the data traffic in the hardware. Source ID is the combination of IP address and MAC address. Normal command allows data traffic filtration based on the IP address. With the "port-security" option, the data traffic will be filtered based on the IP and MAC addresses. Default Format Mode the source ID is the IP address ip verify source {port-security} Interface Config no ip verify source Use this command to disable the IPSG configuration in the hardware. You cannot disable port-security alone if it is configured. Format Mode no ip verify source Interface Config Switching Commands 154