Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 770

ProSafe Managed Switch has been reached the user will be disconnected. is the user ID. The range of octets is 0-4294967295. 0 indicates to use the global limit. Use the "no" form of this command to reset the limit to the default. Default Format Mode 0 user max-total-octets octets Captive Portal Configuration mode no user max-total-octets Use this command to reset the limit to the default. Format Mode no user max-total-octets Captive Portal Configuration mode show captive-portal user Use this command to display all configured users or a specific user in the captive portal local user database. Format Mode show captive-portal user [ ] Privileged EXEC mode Term User ID User Name Session Timeout Idle Timeout Group ID Group Name Definition The user ID The user name Logout once session timeout is reached (seconds). If the value is 0 then use the value configured for the captive portal. Logout once idle timeout is reached (seconds). If the attribute is 0 then use the value configured for the captive portal. The group ID associated with the user The group name If the user ID is specified, the following terms are displayed. Term Password Configured Max Bandwidth Up (bytes/sec) Definition If the password is configured. Maximum client transmit rate (b/s). Limits the bandwidth at which the client can send data into the network. If the value is 0 then use the value configured for the captive portal. Captive Portal Commands 770