Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 15

ProSafe Managed Switch Table 5. CLI Command Modes (Continued) Command Mode Prompt Interface Config Switch (Interface )# Switch (Interface Loopback )# Line Config Switch (Interface Tunnel )# Switch (line)# Policy Map Config Policy Class Config Switch (Config-policy-map)# Switch (Config-policy-class-map)# Class Map Config Switch (Config-class-map)# Ipv6_Class-Map Switch (Config-class-map)# Config Router OSPF Config Switch (Config-router)# Router OSPFv3 Config Switch (Config rtr)# Router RIP Config Switch (Config-router)# MAC Access-list Switch (Config-mac-access-list)# Config TACACS Config Switch (Tacacs)# DHCP Pool Config DHCPv6 Pool Config Stack Global Config Mode ARP Access-List Config Mode Switch (Config dhcp-pool)# Switch (Config dhcp6-pool)# Switch (Config stack)# Switch (Config-arp-access-list)# Mode Description Manages the operation of an interface and provides access to the router interface configuration commands. Use this mode to set up a physical port for a specific logical connection operation. Contains commands to configure outbound telnet settings and console interface settings. Contains the QoS Policy-Map configuration commands. Consists of class creation, deletion, and matching commands. The class match commands specify Layer 2, Layer 3, and general match criteria. Contains the QoS class map configuration commands for IPv4. Contains the QoS class map configuration commands for IPv6. Contains the OSPF configuration commands. Contains the OSPFv3 configuration commands. Contains the RIP configuration commands. Allows you to create a MAC Access-List and to enter the mode containing MAC Access-List configuration commands. Contains commands to configure properties for the TACACS servers. Contains the DHCP server IP address pool configuration commands. Contains the DHCPv6 server IPv6 address pool configuration commands. Allows you to access the Stack Global Config Mode. Contains commands to add ARP ACL rules in an ARP Access List. Using the Command-Line Interface 15