Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 365
show ip igmp interface, This command displays the IGMP information for the interface.
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 365 highlights
ProSafe Managed Switch Term Version1 Host Timer Version2 Host Timer Group Compatibility Mode Definition The time remaining until the local router assumes that there are no longer any IGMP version 1 multicast members on the IP subnet attached to this interface. This could be an integer value or "-----" if there is no Version 1 host present. The time remaining until the local router assumes that there are no longer any IGMP version 2 multicast members on the IP subnet attached to this interface. This could be an integer value or "-----" if there is no Version 2 host present. The group compatibility mode (v1, v2 or v3) for this group on the specified interface. show ip igmp interface This command displays the IGMP information for the interface. Format Modes show ip igmp interface • Privileged EXEC • User EXEC Term Definition Interface Valid slot and port number separated by forward slashes. IGMP Admin Mode The administrative status of IGMP. Interface Mode Indicates whether IGMP is enabled or disabled on the interface. IGMP Version The version of IGMP running on the interface. This value can be configured to create a router capable of running either IGMP version 1 or 2. Query Interval The frequency at which IGMP Host-Query packets are transmitted on this interface. Query Max The maximum query response time advertised in IGMPv2 queries on this interface. Response Time Robustness The tuning for the expected packet loss on a subnet. If a subnet is expected to be have a lot of loss, the Robustness variable may be increased for that interface. Startup Query Interval The interval between General Queries sent by a Querier on startup. Startup Query Count The number of Queries sent out on startup, separated by the Startup Query Interval. Last Member Query Interval The Maximum Response Time inserted into Group-Specific Queries sent in response to Leave Group messages. Last Member Query Count The number of Group-Specific Queries sent before the router assumes that there are no local members. IP Multicast Commands 365