Netgear GSM7328SO Command Line Interface (CLI) User Manual - Page 97
clear radius statistics, dot1x guest-vlan, dot1x initialize, dot1x mac-auth-bypass
UPC - 606449080162
View all Netgear GSM7328SO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
ProSafe Managed Switch clear radius statistics This command is used to clear all RADIUS statistics. Format Mode clear radius statistics Privileged EXEC dot1x guest-vlan This command configures VLAN as guest vlan on a per port basis. The command specifies an active VLAN as an IEEE 802.1x guest VLAN. The range is 1 to the maximum VLAN ID supported by the platform. Default Format Mode disabled dot1x guest-vlan Interface Config no dot1x guest-vlan This command disables Guest VLAN on the interface. Default Format Mode disabled no dot1x guest-vlan Interface Config dot1x initialize This command begins the initialization sequence on the specified port. This command is only valid if the control mode for the specified port is "auto" or "mac-based". If the control mode is not 'auto' or "mac-based", an error will be returned. Format Mode dot1x initialize Privileged EXEC dot1x mac-auth-bypass This command enables MAC-Based Authentication Bypass (MAB) for 802.1x-unaware clients. MAB provides 802.1x-unaware clients controlled access to the network using the devices' MAC address as an identifier. This requires that the known and allowable MAC address and corresponding access rights be pre-populated in the authentication server. MAB works only when the port control mode of the port is MAC-based. Format Mode dot1x mac-auth-bypass Interface Config Switching Commands 97